Post by Jonathan Ott on Dec 7, 2012 17:17:07 GMT -4
EXI500 plastic edition, aluminum frame (not carbon fiber)
The heli has this equipment:
CopterX (CX-ESC-60A) 60A V2 Brushless Electronic Speed Controller X 1
CopterX (CX-1X1000) Mini Heading-Hold Gyro System X 1
CopterX (CX500-10-02) 500L 1600Kv Brushless Motor X 1 (13t pinion)
Fusonic (HB-D-9650) 9650 25g High Torque Mini Servo X 3
Fusonic (MG-D-9257-V2) 9257 25g Metal Gear High Speed Mini Digital Servo X 1
CopterX (CX-PB002) USB Programming Cable for CX-3X1000 / CX-1X1000
Hobby King "Orange" 7channel receiver with satellite (JR/Spektrum compatible)
Hobby King glow in the dark fins and tail rotor blades, with LED to charge the blades.
Hobby King UBEC and a Zippy FlightMax 1300mAh 2s battery to run the servos (bypassed the BEC in the ESC) running through this BEC
Zippy Flightmax 1000mAh 3s to run the Helistrobe and LED's
Head upgraded to an RCAerodyne Chaos 500 head with Tarot fixed length linkages
Boom has been changed out to an Align T-Rex 500 boom.
New EXI Main gear and Align tail rotor drive gear.
Align skid tubes
Two sets of night blades
The heli also has a "HeliStrobe" lighting system installed and running, LED's are on the skids (Red and White) give a disk illumination like this, but RED where the green is, WHITE where the RED is. Extra LED bars are included (Blue, Green, Red, White).
It has been crashed, but all broken/bent parts were replaced with Align parts (main shaft, feathering shaft, skid tubes, tail boom).
Pics in my Helifreak ad: www.helifreak.com/showthread.php?t=477715
$450 + ACTUAL SHIPPING COST
The heli has this equipment:
CopterX (CX-ESC-60A) 60A V2 Brushless Electronic Speed Controller X 1
CopterX (CX-1X1000) Mini Heading-Hold Gyro System X 1
CopterX (CX500-10-02) 500L 1600Kv Brushless Motor X 1 (13t pinion)
Fusonic (HB-D-9650) 9650 25g High Torque Mini Servo X 3
Fusonic (MG-D-9257-V2) 9257 25g Metal Gear High Speed Mini Digital Servo X 1
CopterX (CX-PB002) USB Programming Cable for CX-3X1000 / CX-1X1000
Hobby King "Orange" 7channel receiver with satellite (JR/Spektrum compatible)
Hobby King glow in the dark fins and tail rotor blades, with LED to charge the blades.
Hobby King UBEC and a Zippy FlightMax 1300mAh 2s battery to run the servos (bypassed the BEC in the ESC) running through this BEC
Zippy Flightmax 1000mAh 3s to run the Helistrobe and LED's
Head upgraded to an RCAerodyne Chaos 500 head with Tarot fixed length linkages
Boom has been changed out to an Align T-Rex 500 boom.
New EXI Main gear and Align tail rotor drive gear.
Align skid tubes
Two sets of night blades
The heli also has a "HeliStrobe" lighting system installed and running, LED's are on the skids (Red and White) give a disk illumination like this, but RED where the green is, WHITE where the RED is. Extra LED bars are included (Blue, Green, Red, White).
It has been crashed, but all broken/bent parts were replaced with Align parts (main shaft, feathering shaft, skid tubes, tail boom).
Pics in my Helifreak ad: www.helifreak.com/showthread.php?t=477715
$450 + ACTUAL SHIPPING COST