|
Post by git er done on Nov 6, 2012 11:13:28 GMT -4
hello everyone, could really use some help here, i have an optic 6 transmitter with on optima 7 reciever that i have installed in my storm 450 fbl heli, have all the servos working in proper direction and set up transmitter for throttle and pitch curves, however i cannot get my esc (40 amp storm) to get ot of program mode, ive seen a post that suggests my throttle channel needs reversing, but im not sure how to achieve this with my reciever. Any help would be great, thanks.
|
|
|
Post by Valkman on Nov 6, 2012 13:49:45 GMT -4
The reversing is done on the TX. I don't know your TX but there should be a screen there somewhere to reverse any of the channels. Find the one for your throttle and reverse that one. That is of it needs it. Make sure your travel limits are 100% in each direction and you have no trim set. If all that does not work reduce your trim down to the last. Your throttle may be giving a bit of throttle even when your stick is all the way down and the ESC see's that and won't go out of programing. Sorry I can't help more I'm not familiar with your setup.
|
|
|
Post by moleculo on Nov 6, 2012 23:03:06 GMT -4
|
|
|
Post by Dr. Evil on Nov 7, 2012 21:50:39 GMT -4
I have the A9 so not sure how similar they are but the advise Joe gave and the manual moleculo posted here should help. Good luck....
|
|