|
Post by 4rryc0mm on May 31, 2012 13:29:39 GMT -4
I've recently got the RCA Chaos 600E Pro kit and was wondering if the Power HD 8315TG (as cylic) and Power HD 8307TG (as tail) good to use? Model: HD-8315TG Operating Voltage: 4.8V / 6.0V Operating Current: 300mA / 400mA Operating Speed: 0.16sec.60º/ 0.14sec.60º Stall Torque: 15kg.cm /16kg.cm Size: 40.3X20.2X37.2mm Weight: 57g Dead Band: ≤2uSec Motor: Coreless Type Ball bearing: 2BB Gear: Titanium Connector wire: 300mm Plug: JR Type Operating Temperature Range: -20c+60c Model: HD-8307TG Operating Voltage: 4.8V / 6.0V Operating Current: 300mA / 400mA Operating Speed: 0.09sec.60º/ 0.08sec.60º Stall Torque: 7.0kg.cm /8.5kg.cm Size: 40.1X20.1X37.3mm Weight: 57g Dead Band: ≤2uSec Motor: Coreless Type Ball bearing: 2BB Gear: Titanium Connector wire: 300mm Plug: JR Type Operating Temperature Range: -20c+60c Any advice would be helpful
|
|
|
Post by Chris Reibert on May 31, 2012 14:06:59 GMT -4
Yes you finally got logged on. Glad to see you made it to the lounge.
As far as the HD servos I run all HD brand on my 500 and they have performed great do far!
|
|
|
Post by 4rryc0mm on May 31, 2012 14:17:07 GMT -4
Yes, I'm here now and thanks to you I couldn't find any review for the Power HD servos being used in helis, so wanted to confirm before screwing it up.
|
|
jombo
PARK FLYER
Posts: 63
|
Post by jombo on Jun 10, 2012 19:25:29 GMT -4
I use the HD3688 for the 450 and 500 tail and the HD1810MG digital servo in the 450 for cyclic . so far they have worked out fine .
|
|