|
Post by chipwich on May 20, 2012 20:27:49 GMT -4
Not having luck with this one. Have ordered 12, 13, and 14t pinions for Align 600E, and they are all 5mm. My Scorpion 4025-500 is a 6mm. Thanks in advance.
|
|
mike
ROOKIE
Posts: 8
|
Post by mike on May 20, 2012 21:05:02 GMT -4
|
|
|
Post by mattox on May 20, 2012 21:28:37 GMT -4
|
|
|
Post by chipwich on May 21, 2012 7:57:04 GMT -4
Perfect guys! Thanks.
|
|
|
Post by wolfen on May 22, 2012 9:48:05 GMT -4
What is the difference in the 0.7M 6mm Shaft Diameter , and the 1.0M 6mm Shaft Diameter? will these both mesh with the main gear, Im looking to get a 10T 6mm pinion for a viper motor that I have.
|
|
drev
FUN FLYER
Posts: 198
|
Post by drev on May 22, 2012 13:27:11 GMT -4
The .7M & 1.0M is the guage (size & spacing) of the teeth on the gear. 6mm is the motor shaft size. If the M numbers aren't the same the teeth will not mesh correctly. Drev. edit: the larger the "M" number the larger the teeth on the gear.
|
|
|
Post by chipwich on May 22, 2012 14:49:43 GMT -4
Interesting, I notice that the one mike posted a linlk to is a .8mm guage, and that the RevCo brand has either .7 or 1.0. The RevCo fitment chart shows the .7 for the 600E and early 700E models.
|
|