|
Post by reefbum on Feb 13, 2012 19:33:50 GMT -4
My first build ever so please bear with me if I don't give all required information, please just ask.
Chaos 600 with GT-9 Gyro
Savox SH-1290MG tail servo when connected directly to Spektrum AR8000 RX RUDD channel works fine and is setup and centered.
When connecting GT-9 gyro to rudd channel on RX and signal on gear channel servo is dead. Flipping Gyro switch on TX does put Gyro in 0=HH/blue or 1=Rate/red led.
Any help making this servo work would be great, or unless I need myself a new/better gyro.
regards
|
|
drev
FUN FLYER
Posts: 198
|
Post by drev on Feb 14, 2012 2:53:01 GMT -4
Search youtube for 'TAROT GY650 mems gyro setup guide'. It shows a video on how to program the gyro. The GT-9 & the TAROT GY650 are the same gyro. I'd give you a link but I don't know how (sorry). Should be easy to find. Hope this helps U out. Drev..Fly safe.
|
|
|
Post by chumley on Feb 14, 2012 8:23:05 GMT -4
Search youtube for 'TAROT GY650 mems gyro setup guide'. It shows a video on how to program the gyro. The GT-9 & the TAROT GY650 are the same gyro. I'd give you a link but I don't know how (sorry). Should be easy to find. Hope this helps U out. Drev..Fly safe.
|
|
|
Post by reefbum on Feb 14, 2012 8:35:00 GMT -4
Thanks, I already watched this video. I usually try to do research before posting, however I have found this GT-9 is defective. I borrowed a Spartan Quark gyro from a friend last night and everything works fine with it.
The GT-9 while it does power on and initialize it sends no power to servo, if taking the index finger and tap on the top of gyro is will move the servo for a split second.
regards
|
|