|
Post by jesses151 on Dec 28, 2011 13:44:37 GMT -4
As far as the setup, yeah it's stock GT9 gyro and the tower pro MG958 tail servo. My BEC is the 10amp CC, not the pro. Never the less I found that the gyro/tail setup would not initialize every time with the BEC set for the default 5.1volt output is was once I set the BEC to 5.7v that it consistantly worked. When set at even 5.6v there was still no initialization (very touchy). I would say anyone that has an adjustable BEC in place, it certainly won't hurt to increase the output voltage to 5.5volts or better. Careful though, Cliff said some tail servos may react differently to too much voltage. Anyway there's my findings. Hope this saves someone else some hassle. -Jesse
|
|
|
Post by Dr. Evil on Dec 28, 2011 23:15:23 GMT -4
Thanks for doing the homework for us Jesses, I am sure it will come in handy at some point atleast I am still wondering if that had anything to do with all the mishaps for everyone runing that exact setup.
|
|
|
Post by onthedeck on Dec 29, 2011 9:40:13 GMT -4
+1...Some very good info for sure ..
|
|
|
Post by onthedeck on Dec 29, 2011 9:44:42 GMT -4
Also for anyone that might read this thread..Im running the Hyperion's in my Chaos 600E with a stright 6.6V LiFe pack so that's another option..
|
|