|
Post by gregory on Feb 28, 2013 12:34:35 GMT -4
I have a chaos 600e, I installed the stretch boom for the 700 size fuselage I have, and the bolts where the boom enters the transmission case actually broke along the case. I have a friend who offered me a t-case from his align 550. I know they are the same as align 600, but the chaos has wider sideframes, will the align part fit without spacer? Greg
|
|
|
Post by Chris Reibert on Feb 28, 2013 13:28:29 GMT -4
|
|
|
Post by Dr. Evil on Feb 28, 2013 13:31:17 GMT -4
I have a chaos 600e, I installed the stretch boom for the 700 size fuselage I have, and the bolts where the boom enters the transmission case actually broke along the case. I have a friend who offered me a t-case from his align 550. I know they are the same as align 600, but the chaos has wider sideframes, will the align part fit without spacer? Greg Greg, welcome to the lounge. The trex 600e trans-case will not fit the Chaos nor do I think the 550 will either. For one, they aren't wide enough and i am not even sure the 550 & 600 are interchangeable. That said, if you can't find a Chaos replacement on RCA's website then I suggest going with a trex 600n case.
|
|
|
Post by edintexas on Mar 7, 2013 22:06:10 GMT -4
The Chaos gear case is actually a Phoenixtech part. I know because I had to replace mine and the replacement from RCA was in a Phoenixtech package. I'm not sure you can get it any cheaper than what RCA sells them for though.
|
|