lee
PARK FLYER
Posts: 68
|
Post by lee on Jan 11, 2013 17:22:32 GMT -4
Hi guys, One of my stock servos has become very stiff to turn by hand. I have stripped it down and re greased it but still no difference. Just want to know if anyone has a clue as to why this is? Is it nothing, or is the motor about to kick the bucket? It has no ill effects to flying, just twice as stiff to turn by hand as the others. Thanks for the help. Lee
|
|
|
Post by Dr. Evil on Jan 11, 2013 18:01:04 GMT -4
Hi guys, One of my stock servos has become very stiff to turn by hand. I have stripped it down and re greased it but still no difference. Just want to know if anyone has a clue as to why this is? Is it nothing, or is the motor about to kick the bucket? It has no ill effects to flying, just twice as stiff to turn by hand as the others. Thanks for the help. Lee I havn't ever had a stock servo go out on me yet expet the tail on my 600 but as far as all my other Chaos helis...they been just fine. I would say if it is still working fine, I really wouldn't worry much but than again if you're not comfortable with it..you may want to swap it out but keep in mind that assuming that this is one of the cyclic servos if you change one you should change em all out so they'll match.
|
|
lee
PARK FLYER
Posts: 68
|
Post by lee on Jan 11, 2013 18:33:31 GMT -4
Thanks Dr E. I just wondered what could be the reason. I will just keep flying
|
|
|
Post by Valkman on Jan 11, 2013 18:38:23 GMT -4
If it is one of the cyclics try swapping the gears with one of the other servos.
|
|