|
Post by elec1800 on Oct 30, 2012 17:55:53 GMT -4
Hello everyone, I was wondering if someone can give some more detailed info on programming the black widow. Want to know things like do i program it with idle up or in normal mode, etc etc. Thanks in advance Mike
|
|
bobsp12
FUN FLYER
The CHAOS theory rules my life
Posts: 155
|
Post by bobsp12 on Nov 16, 2012 7:20:37 GMT -4
Hey Mike, are you still after help with the black widow, just came across your post.
|
|
|
Post by Dr. Evil on Nov 16, 2012 9:00:25 GMT -4
Hey Mike...yes sorry, didn't see your post till now. Please let us know if you still need help.
|
|
|
Post by Valkman on Nov 16, 2012 13:24:14 GMT -4
Funny this is brought up I spent the last 3 hours trying to get mine going after an update to 0.98c. After 3 resets I am going to leave it till another day before I do something stupid. :-)
|
|
|
Post by Valkman on Nov 16, 2012 17:32:10 GMT -4
I had another go and test hop no luck I'm sure its something stupid I'm doing tomorrow is another day.
|
|
|
Post by Dr. Evil on Nov 16, 2012 18:29:44 GMT -4
I had another go and test hop no luck I'm sure its something stupid I'm doing tomorrow is another day. I am assuming everything been fine as far as flying goes? Did you do something to cause for a re-program? When all fails....reset and start from the start. Good luck
|
|
|
Post by Valkman on Nov 16, 2012 19:15:16 GMT -4
I did an update and that reset everything to default. I am not at home for couple days but have the heli with me so ill give it a go again. I'm sure I'm missing something no big deal. Thanks
|
|
|
Post by Dr. Evil on Nov 16, 2012 21:02:53 GMT -4
Oh ok...I'll make sure I don't do an update.... LOL
|
|
|
Post by Valkman on Nov 17, 2012 8:10:59 GMT -4
lol you might be better of if it's working leave well enough alone! There is a few videos on youtube and I followed one to a Tee and all is good now.
|
|
|
Post by elec1800 on Nov 17, 2012 8:12:45 GMT -4
hello fellas, yes still need help with the programming. I appreciate it
|
|
|
Post by Dr. Evil on Nov 17, 2012 8:27:58 GMT -4
hello fellas, yes still need help with the programming. I appreciate it Ok Mike, whatcha got? Give us some background on what you have done and your current setup and where you are at this point. I am assuming its on your 600 or 550 but if not it's all good, the setup is basically the same even on a 450 or 700. We will try and help you as best as possible. LIke Joe said, there are videos including a pretty good one done by someone here on the lounge plus a manual which can be downloaded from RCA's website as well.
|
|
|
Post by elec1800 on Nov 17, 2012 8:32:45 GMT -4
Hello Dr. Evil, quick run down since i am getting ready for work sorry about that. Well its for a Chaos 550 and was done building the heli. I went thru the software and it doesnt look difficult but since its my first time with it i would prefer to ask the experts here on programming it
|
|
|
Post by Dr. Evil on Nov 17, 2012 8:34:07 GMT -4
Here is a video for the basic setup. I followed this video and manual for my setup and added my fine adjustments but again let us know where you are at this point so we can try and help.
|
|
|
Post by Dr. Evil on Nov 17, 2012 8:36:13 GMT -4
Hello Dr. Evil, quick run down since i am getting ready for work sorry about that. Well its for a Chaos 550 and was done building the heli. I went thru the software and it doesnt look difficult but since its my first time with it i would prefer to ask the experts here on programming it Ok perhaps we can talk more when you have time but take a look at the video I just posted, it was a really big help to me.
|
|
|
Post by elec1800 on Nov 17, 2012 8:36:45 GMT -4
as far as the radio setup goes for the programming. All trims stay at 0 correct? also is it done with the idle switch up and what about tail gain settings on the radio. Sorry if they seem basic simple questions but would prefer to be sure on the setups
|
|