|
Post by qmaverick on Sept 22, 2012 19:36:09 GMT -4
|
|
|
Post by Valkman on Sept 23, 2012 4:59:36 GMT -4
Thanks for the share. What blade are they? Are they the HK ones? I got a set of those in 690 I still have to try out. I also got that motor you used but mine would not run right with the ICE controller no matter what settings I used. I ended up putting in and Align motor. However I have the feeling the motor did not match the ESC and probably would run ok with one of HK's controller. I remember the first flight after about a minute the motor started to make a noice and it got louder. I thought there was something up with the bearings and landed. After inspection it was the label on the can was coming off and hitting off the frames!
|
|
|
Post by qmaverick on Sept 23, 2012 6:01:48 GMT -4
Thanks!
These are the blades that came with the kit, no idea of brand or type.
This motor performs nicely so far, the original motor, the Turnigy Typhoon 500H 1800kv, started to come apart when spooling up for the 1st time. I did fix the Typhoon but kept this motor in for now.
|
|
|
Post by Valkman on Sept 23, 2012 8:24:43 GMT -4
|
|
|
Post by Dr. Evil on Sept 23, 2012 9:44:43 GMT -4
very nice qmaverick. Thanks for sharing.
|
|