|
Post by onthedeck on Nov 11, 2011 16:57:22 GMT -4
Well I finished my Chaos 600E today .Took me a week because of my hand but the whole build went as smooth as my Chaos 450PRO and Chaos 700E build did.Everything is nice and tight with zero slop,can't ask for more and love the quality of the part's ..Will do the maiden tomorrow as long as the weather hold's up .Here's my setup .. CC ICE 100 ESC Scorpion 4025-1100KV with 16T pinion Hyperion DS20xTMD cyclic servo's Hyperion DS20x-GCD tail servo Align GP780 gyro AR7100 running a stright 6.6V LiFe pack,no BEC needed Stock CF paddle's Stock 600MM main blade's Stock plastic tail blade's I'll put the stock CF tail blade's on after the maiden.Also still trying to figure out the GT-9 gyro so that will go on also once I get it going..I like running gov mode and the kit came with a 15/16T pinion.Gov is maxed at 2000RPM so i'll change to a 17T pinion if I want a little more headspeed..One thing kinda shocked me was the cyclic servo's,they are pretty fast with more than enough torque ..... 0.13 oz of speed and 263.8 oz of torque and when I flick the cyclic stick it shows because the swash turn's into a blurr..Going to be a fun flyer,I can already tell ..
|
|
|
Post by Dr. Evil on Nov 11, 2011 21:39:53 GMT -4
NICE! Now go and fly the crap out of it....
|
|
|
Post by chumley on Nov 11, 2011 23:56:07 GMT -4
Very nice - just keep it away from your hands while everything is spinning . . .
|
|
|
Post by allspunup on Nov 12, 2011 17:40:19 GMT -4
looks good man! I wish I would have waited another 3 weeks to get this version of the 600....I like the black head parts and such....It doesnt matter now as i have changed over to fbl and cliffs only comes as polished....Anyway, looks good! FLy hard and keep er outta the dirt!!
|
|