|
Post by Jonathan Ott on May 15, 2012 8:19:24 GMT -4
Okay, I've got the Chaos 600 super combo with the Phoenixtech motor. I recently upgraded to a 120A ESC that can go from 4-14 cells.
If I remember right, the Phoenixtech motor is good for 6s, what are my choices for 8, 10 & 12 cells, should I decide to bump up my cell count?
Thanks,
Jon
|
|
|
Post by Dr. Evil on May 15, 2012 8:40:04 GMT -4
Okay, I've got the Chaos 600 super combo with the Phoenixtech motor. I recently upgraded to a 120A ESC that can go from 4-14 cells. If I remember right, the Phoenixtech motor is good for 6s, what are my choices for 8, 10 & 12 cells, should I decide to bump up my cell count? Thanks, Jon Don't quote me on this but if I remember correctly, someone at one point mentioned that it can be pushed to a 8s on the stock electronics of the combo kit but please verify this b4 doing it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 15, 2012 12:10:45 GMT -4
On 8 cells currently I am using the 4025-740 On 10 and 12 cells I used the 4025-630
I found personally the best balance between power and weight is the 740 on 8 cells
|
|
|
Post by Jonathan Ott on May 15, 2012 13:59:24 GMT -4
Rov -- Are those Scorpion's?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 15, 2012 22:48:52 GMT -4
Scorpions or the sister motor Hyperion
|
|
|
Post by Jonathan Ott on May 17, 2012 9:24:58 GMT -4
Cool, thanks.
|
|
|
Post by ak3levy on Jul 12, 2012 9:38:40 GMT -4
Hey on our 4025 790 what main drive gear size are you using? and can I use my Ice 100 with that engine if I run 8s ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 12, 2012 15:40:53 GMT -4
I'm using a 17 tooth pinion for high headspeed. Yes you can use the Ice 100 on 8S
|
|
|
Post by ak3levy on Sept 21, 2012 15:03:30 GMT -4
I am also using ICE 100, 17 pin 8s with Hyperion 4025 740K
|
|