lee
PARK FLYER
Posts: 68
|
Post by lee on May 30, 2012 3:17:27 GMT -4
Much appreciated dude, but being an impatient person, i ordered from a place in the UK. Should be here in a couple of days. How do you get 0º pitch? If i extend the servo links and the control arms, there is not enough thread left in them to be safe. I have it on the second hole in the head.
|
|
|
Post by Dr. Evil on May 30, 2012 11:53:46 GMT -4
Much appreciated dude, but being an impatient person, i ordered from a place in the UK. Should be here in a couple of days. How do you get 0º pitch? If i extend the servo links and the control arms, there is not enough thread left in them to be safe. I have it on the second hole in the head. Ok...hang on, I am trying to get Valkman to help you out with that one as he has done this already on his 600.
|
|
|
Post by Valkman on May 30, 2012 13:27:39 GMT -4
Hi Lee. Here is a picture I just took for you I hope it helps. I also used the middle hole for the Jesus bolt. The picture is at zero pitch with everything lined up and servos are at 50 %. I get +- 12 Deg with no binding. Ill keep an eye here now let us know how you get on mate. Attachments:
|
|
|
Post by Dr. Evil on May 30, 2012 13:43:43 GMT -4
Thanks Valkman
|
|
lee
PARK FLYER
Posts: 68
|
Post by lee on May 30, 2012 16:59:29 GMT -4
Awesome mate, cheers or that. As soon as my balls show up LOL i'll be back in business.
|
|
lee
PARK FLYER
Posts: 68
|
Post by lee on May 30, 2012 17:08:11 GMT -4
Hey Valkman. You have the stock servos on there. What did you set the frequency to on your FBL unit? You heli is set up exactly like mine
|
|
|
Post by Valkman on May 31, 2012 7:00:12 GMT -4
Mine is Swash/tail/throttle ....1.5ms@333Hz
|
|
lee
PARK FLYER
Posts: 68
|
Post by lee on May 31, 2012 15:58:36 GMT -4
Great thanks, i had it set to default 50Hz on my BeastX so i'll bump it up.
|
|
lee
PARK FLYER
Posts: 68
|
Post by lee on Jun 1, 2012 5:39:11 GMT -4
Ok i have tried to get the 20mm on the arm, but looking at your photo, the links are different to mine. They are longer. If i unscrew mine to give me 20mm they are just about to fall off??
|
|
|
Post by Valkman on Jun 1, 2012 6:01:17 GMT -4
Are you talking about the black link on the BW head?I forgot to mention I have the smaller link (600) on mine. Sorry about that. I had a link that had a big body and drilled and tapped it to fit the threaded bar. It is a very tight fit so it won't come off the swash when rotating. The 20mm is measured from the top of the lnk to the center of the hole. Could you use/make up a longer threaded bar?? I am suprised you cannot get 20 mm from the stock one. Have you tried unscrewing the threaded bar a bit from the arm and re-thread locked it then put the black link back on to give you the 20mm? Hope this helps you lad.
|
|
lee
PARK FLYER
Posts: 68
|
Post by lee on Jun 1, 2012 17:20:41 GMT -4
Thanks, i'll check it out. At a wedding this weekend so it will Monday b4 I test it.
|
|
lee
PARK FLYER
Posts: 68
|
Post by lee on Jun 13, 2012 5:35:06 GMT -4
Great thanks, i had it set to default 50Hz on my BeastX so i'll bump it up. Hi Valkman, Looking in the BeastX menu I can change the tail servo to 333Hz but the swash frequency menu only goes up to 200Hz and theres no Throttle Frequency menu. Should I adjust the swash to 200 anyway? I'm guessing as long as you don't go over the frequency limit, it should be ok? Thanks for the help.
|
|
|
Post by Valkman on Jun 13, 2012 10:21:27 GMT -4
If your servos are 333hz and the highest the Beastx goes is 200 put it on 200. I would check for an update for the Beastx on the net if you have not done this already.
P.S........ to BW owners.....there is a new update on the BW Gui 1.0.0.27 Fw 0.97a. It includes a vibration log.....nice.
|
|
lee
PARK FLYER
Posts: 68
|
Post by lee on Jun 14, 2012 15:14:15 GMT -4
Thanks dude, hope to maiden tomorrow.
|
|
|
Post by Dr. Evil on Jun 14, 2012 16:29:57 GMT -4
Thanks dude, hope to maiden tomorrow. Good luck!!! ;D
|
|