|
G-JIVE
Apr 22, 2012 5:17:06 GMT -4
Post by Valkman on Apr 22, 2012 5:17:06 GMT -4
O no. What the hell happened? If the fuse ok?
|
|
|
G-JIVE
Apr 22, 2012 6:08:07 GMT -4
Post by Chris Reibert on Apr 22, 2012 6:08:07 GMT -4
At least it wasn't in the fuse yet! Gotta love test flights Sorry to hear bad news
|
|
|
G-JIVE
Apr 22, 2012 6:39:44 GMT -4
Post by qmaverick on Apr 22, 2012 6:39:44 GMT -4
It was flying really nice and stable for the very first time, then it started to descend a little, so I added a bit of throttle and next thing I know it rockets up and to the left, right into the shed... Ordered some of the replacement parts, some parts were already underway and some parts I have here already... So again the build is delayed...
|
|
|
G-JIVE
Apr 22, 2012 8:26:13 GMT -4
Post by Valkman on Apr 22, 2012 8:26:13 GMT -4
RX issue? My 450 did the same thing. I rebuilt and spooled it up without blades then suddenly it locked on full throttle and the swash went left mimicking the same thing, but without the crash!
|
|
|
G-JIVE
Apr 22, 2012 9:04:07 GMT -4
Post by qmaverick on Apr 22, 2012 9:04:07 GMT -4
RX issue? My 450 did the same thing. I rebuilt and spooled it up without blades then suddenly it locked on full throttle and the swash went left mimicking the same thing, but without the crash! I'll have to check when it is rebuild, it is a possibility, I will move the Rx to another possition anyway, but it could have been that the wind played some part in it too. Maybe a downdraft, I added throttle and then an updraft... I wish I knew...
|
|