|
Post by chitty024 on Aug 10, 2013 23:40:47 GMT -4
Spektrum RX?? Do you have one or two sat Rx's? I check mine after each flight and I never get the blinking lights (signal Loss) and I did go out quite far a few times. I would try another RX as you also said the pitch jumped. Maybe the rx, depending on the model one you have, went into failsafe and it jumped, then got the signal and it dived. Either way, sounds like an RX issue alright. I have one satellite. I will try replacing the rx first and hopefully that fixes it.
|
|
|
Post by Valkman on Aug 11, 2013 5:33:21 GMT -4
Just two more things. Make sure you do a range check, and make sure after the crash that there is no wires damaged especially going into the Sat.
|
|
|
Post by chitty024 on Aug 12, 2013 9:35:16 GMT -4
Just two more things. Make sure you do a range check, and make sure after the crash that there is no wires damaged especially going into the Sat. got it thanks!
|
|
|
Post by chitty024 on Nov 9, 2013 10:55:47 GMT -4
Forgot to update on what happened! I put it all back together on the bench on realised that servos would randomly freeze at different spots. WHich is why it shot up uncontrollably. It actually ended up being a bec issue with the brand new esc. I went to the LHS and got a castle bec and sure enough everything works perfect now!
|
|
|
Post by chitty024 on Nov 21, 2013 13:28:17 GMT -4
Just installed the Tracx head this morning. Waiting on a 3gx to hopefully come in the mail today. Install went smooth but it appears the bottom of the ball links are just barely rubbing on the swash. Very minor sanding might be needed.
|
|
|
Post by chitty024 on Apr 4, 2014 19:12:01 GMT -4
Been awhile and I need some help. I am still using the original phoenixtech motor that came in the super combo. I just got a Castle esc for it and in order to set up the gov I need to know the number of poles on the motor. Can anyone help me with this? The only thing I can remember is it's 1100kv I think.
|
|
|
Post by Dr. Evil on Apr 4, 2014 23:09:35 GMT -4
Been awhile and I need some help. I am still using the original phoenixtech motor that came in the super combo. I just got a Castle esc for it and in order to set up the gov I need to know the number of poles on the motor. Can anyone help me with this? The only thing I can remember is it's 1100kv I think. Hey stranger, glad to hear from ya.... I will have to do a little research on that cause I can't remember. Stand by unless someone knows this off top of their head.
|
|
|
Post by Dr. Evil on Apr 5, 2014 16:44:21 GMT -4
Chitty, if what I've found is correct and I believe it is...the pole count is 8. Hope this helps....
|
|
|
Post by chitty024 on Apr 5, 2014 21:39:50 GMT -4
Chitty, if what I've found is correct and I believe it is...the pole count is 8. Hope this helps.... Thank you sir! Much appreciated!
|
|
|
Post by chitty024 on Apr 14, 2014 10:49:17 GMT -4
|
|